Vestax PDX-2300 Bedienungshandbuch PDF herunterladen (Seite 10)

q Carefully release the tone arm from the tone arm clamp.

Adjustment of Horizontal Zero Balance

A Tone arm height adjustment may be necessary for some

cartridge types. The height can be adjusted up to 9mm by rotating

the arm height adjustment screw.

Cartridge height 16mm

↓

Height adjustment not necessary

Cartridge height 25mm

↓

Height adjustment +9mm (Max)

ADJUSTMENT

(

)

The balance weight and cartridge are

balanced, the tone-arm is held horizontal.

The balance weight setting is too heavy.

The balance weight setting is too light.

e Return the tone arm to resting position.

w Turn the balance weight clockwise or anti-clockwise until

balanced horizontally.

Rotate

this part

Balance Weight

Counter Ring

Rotate

this part

Balance Weight

Counter Ring

Arm Height Adjustment Screw

When adjusting the horizontal balance, take care not to

touch the stylus.

NOTE

If the balance weight is moved, readjust the horizontal

balance again.

If you put too much pressure on the stylus, it can

cause the stylus to jump during scratch play and will

shorten the stylus's life.

NOTE

Be sure to tighten the arm height adjustment screw

well. The stylus may jump/skip if the height setting is not

secured.

NOTE

r After adjusting the horizontal balance, set the balance weight

rotating only the counter ring to align with by the "0" weight

setting to the center line of the arm axis.

t Turn the balance weight in the direction shown to adjust the

stylus pressure (weight setting will depend on your stylus).

When you turn the balance weight, the counter ring moves

displaying, the weight setting (0-5) selected.

Tone arm height adjustment

1 2 ... 5 6 7 8 9 10 11 12 13 14 15

Kommentare zu diesen Handbüchern

Keine Kommentare

Vestax PDX-2300 Bedienungshandbuch Seite 10

Kommentare zu diesen Handbüchern

Verwandte Produkte und Handbücher für Drehscheibe Vestax PDX-2300